X2 MINI MILLING MACHINE |
|
| Drilling capacity |
13mm |
| End milling capacity |
16mm |
| Face milling capacity |
30mm |
| Headstock travel (Z) |
180mm |
| Cross axis (x) |
100mm |
| Longitudinal axis (Y) |
220mm |
| Spindle rotary angle |
-45o-+45o |
| Output power |
350w |
| Spindle speed |
Low range 0~1100rpm¡À10©‡
High range 0~2500rpm¡À10©‡ |
| Spindle taper |
MT#3 or R8 |
| T-slot |
12mm |
| Weight (Net/Gross) |
50/68kg |
| Packing size |
540¡Á500¡Á760mm |
|
|
X2A |
|
| Auto feeder |
You can mount this Auto feeder on X2 yourself! |
S/N: 10132 |
|
| Clamping kit
42pcs
S/N: 10047
|
Bolt size: 10mm Include: 12 studs, 6 step block Pairs |
4 T nuts, 4 flange nuts,4 coupling nuts, 6 end hold downs |
|
| Quick vice |
| Width 100mm |
| S/N: 10036 |
|
Vice |
Width 80mm |
S/N: 10109 |
|
MT#3 collet |
¦µ4mm |
S/N:10119 |
¦µ6mm |
S/N:10120 |
¦µ8mm |
S/N:10121 |
¦µ10mm |
S/N:10122 |
¦µ12mm |
S/N:10123 |
¦µ14mm |
S/N:10124 |
¦µ16mm |
S/N:10125 |
¦µ4-16mm set |
S/N:10126 |
|
2 Flute HSS end mill |
¦µ4mm |
S/N:10038 |
¦µ6mm |
S/N:10039 |
¦µ8mm |
S/N:10040 |
¦µ10mm |
S/N:10041 |
¦µ12mm |
S/N:10042 |
¦µ14mm |
S/N:10043 |
¦µ16mm |
S/N:10044 |
¦µ4-16mm set |
S/N:10045 |
|
Indexable carbide end mill |
MT#3 ¦µ30MM |
S/N:10046 |
|
Mill chuck set MT#3 |
Chuck dia. 4,6,8,10,12,14,16mm |
S/N:10037 |
|
¡¡¡¡S/N: 10127 stub milling machine arbor MT#3, ¦µ16mm(picture ref. S/N: 10116)
¡¡¡¡S/N: 10128 boring arbor with boring cutter MT#3 (picture ref. S/N: 10117)
¡¡¡¡S/N: 10129 stub milling machine arbor MT#3, ¦µ16mm(picture ref. S/N: 10118)
¡¡¡¡S/N: 10094 rotary table |
